Head
|
No 1, 2 etc. depending on the number of heads specified in the basic settings.
|
Head turned...
|
Indicate whether the head is turned towards or away from the product orientation.
|
Print side
|
Specify on which side the address is written. (Back/Front)
|
Delay
|
Enter the delay between the photocell and head 1 from the time the write signal is received.
Head 2: The delay between head 1 and head 2.
|
Tacho div.
|
Specifies the division of the pulse train from the pulse sensor.
19 is the normal value.
|
Belt speed
|
Specifies the maximum speed of the belt in mm per second. Only used when the Algorithm is set to "printer controlled".
|
Print head
|
Enter head G and M. Refer to the printer documentation for more information.
|
Algorithm
(Grid)
|
Specifies the number of drops that the jet can generate at altitude.
•4 rows (16 drops)
•6 lines (7 drops) limit the information in the layout and affect the production speed
|
ISA card
|
Port address: specify the hardware address of the COM port used.
Port IRQ: Set the interrupt for the selected COM port.
|
Port no - PCI card
|
Enter the port number used.
|
Port speed
|
Shows the speed used for communication.
|