Head

No 1, 2 etc. depending on the number of heads specified in the basic settings.

Model

Specify the printer head model.

Head turned...

Indicate whether the head is turned towards or away from the product orientation.

Print side

Specify on which side the address is written. (Back/Front)

Delay

Enter the delay between the photocell and head 1 from the time the write signal is received.

Head 2: The delay between head 1 and head 2.

Tacho div.

Belt speed

Specifies the maximum speed of the path in mm per second. Only used when the Algorithm is set to "printer controlled"

Print head

Enter head G or M. Refer to the printer documentation for more information.

Algorithm

The grid indicates the number of drops that the jet can generate at altitude.

The choice of raster affects the maximum production rate.

Adjust. jet 1-4

 ISA card

Port address: specify the hardware address of the COM port used.

Port IRQ: Set the interrupt for the selected COM port.

Port no - PCI card

 Enter the port number used for the print head.

Port speed

Specifies the speed used for communication.

Recup.

Specify whether the printer should alarm if there is a problem with the return tube.

Cover

Specify whether the printer should alarm if the cover is not installed.